Latest Firmware Downloads

New! TyconOS Discovery Tool - this tool is written in Java so it is cross platform compatible. You must have Java loaded on your computer for this tool to work for you. You must also have TyconOS Firmware loaded on the units. For WispOS firmware, get this Windows only discovery tool 

WISPOS Get the original EZ-Bridge LT/LT+ discovery tool here

 

TyconOS Firmware - Tycon has developed a new firmware with many new features that can be used for all EZ-Bridge LT2+ and EZ-Bridge LT5+ models with GEN 3 16M or later hardware. Please note that this new firmware is a complete re-write of the WISPOS Firmware so the look and feel is completely different. Refer to the software manual for more information before loading this new firmware. The firmware has an A side (Access Point) and a B side (Station/Client). We highly recommend updating the remote unit first and local unit second.

Note: To upgrade a WISPOS 2.4GHz unit it requires an intermediate step to first upload the rescue software to the units. Please read the instructions first before attempting. To upgrade the 5GHz units, just load the new TyconOS software and uncheck "keep settings".

 

EZ-Bridge® LT2+ (EZBR-0214+) and EZ-Go®2+ (EZGO-0214+) . GEN 3 16M 

EZ-Bridge® LT5+ (EZBR-0516+) and EZ-Go®5+ (EZGO-0516+) . GEN 3 16M

Release Notes

 


WISPOS Firmware - Original Firmware used on all EZ-Bridge Models

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2+ (EZGO-0214+) . GEN 3      images.jpgThe LT2+ has 3 different versions. GEN 1 can be upgraded to GEN 2 by loading the latest GEN 2 firmware to the unit. GEN 2 and GEN 3 have slight hardware differences which require different firmware.  If you have GEN 2 you must only load GEN 2 firmware and if you have GEN 3 you must only load GEN 3 firmware. You can tell which GEN you have by looking at your firmware version in the discovery tool or the status page. 

Release Notes

 

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2+ (EZGO-0214+) . GEN 2      images.jpgThe LT2+ has 3 different versions. GEN 1 can be upgraded to GEN 2 by loading the latest GEN 2 firmware to the unit. GEN 2 and GEN 3 have slight hardware differences which require different firmware.  If you have GEN 2 you must only load GEN 2 firmware and if you have GEN 3 you must only load GEN 3 firmware. You can tell which GEN you have by looking at your firmware version in the discovery tool or the status page.

Release Notes

 

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2 (EZGO-0214+) . GEN 1    qmarktip1.jpgThis is the original LT2 model. It is no longer being produced, to get higher speeds out of your device you should upgrade to the LT2+

 

EZ-Bridge® LT2 (EZBR-0214) and EZGo2 (EZGO-0214).

Release Notes

 

EZBase-2 and EZ-Bridge® (EZBR-0315). 3Plus

Release Notes

 

EZ-Bridge® LT5+ (EZBR-0516+) and EZGo5+ (EZGO-0516+) . GEN 3      images.jpgThe LT5+ hardware has been updated to a GEN 3 board. Use this firmware for the latest LT5+ units. "GEN3" will show on the status page and discovery tool.

 

EZ-Bridge® LT5+ (EZBR-0516+) and EZGo5+ (EZGO-0516+) . GEN 2      images.jpgThe LT5+ originally was released as a GEN 2 board. Use this firmware for the GEN 2 boards only.

Release Notes

 

EZ-Bridge® LT5 (EZBR-0519) and EZGo5 (EZGO-0519) and EZBase-5.    qmarktip1.jpgThis is the original LT5 model. It is no longer being produced, and will be replaced with the LT5+ which is capable of higher speeds.

Release Notes

 


EZ-Bridge Ultra

Note: There are two versions of EZ-Bridge® Ultra. Each has a different firmware. The older version is V1 and the newer version is V2.



EZ-Bridge® Ultra V1
(Note: There is a different firmware for Side A and Side B)    qmarktip1.jpgEZ-Bridge_Ultra_V1_feeds.png
 V1 Feed Example


V5.5.8-2   Note: This update only for Ultra5

V5.5.8

V5.5.6

Ultra Release Notes

 



EZ-Bridge® Ultra V2
(Note: There is a different firmware for Side A and Side B)    qmarktip1.jpgEZ-Bridge_Ultra_V2_Feeds.png
 
V6.0.7  

V5.5.10  

Ultra Release Notes

 


Download the Discovery Tool    qmarktip1.jpgThe Discovery Tool will help find your EZ-Bridge® on the network. It will Discover across different subnets. Some software like Antivirus or Firewall may prevent discovery.

  • Version V1.35 (For EZ-Bridge® LT+, EZGO+ and EZ-Base) (Windows only)
  • Version V2.3 (For EZ-Bridge® Ultra Only) (Java for Windows, Linux, IOS)

 


EZ2+ and EZ5+ SNMP MIB File qmarktip1.jpgThe MIB file gives a definition of SNMP commands that are available in the EZ2+ and EZ5+ wireless antennas

SNMP MIB File Aug 30 2015

 


EZ OS Programming Instructions    qmarktip1.jpgThese are the generic instructions for general information. See product User Guides for specific instructions OR visit our Knowledgebase