2.4 GHz, 100 Mbps Expansion Unit (EZGO-0214+)

Description
Gallery
Specs
Live Demo
Downloads

Item# EZGO-0214+

The EZ-Go® is a high power 25dBm (316mW) outdoor wireless access point or client device operating in the 2.4GHz or 5GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11g/n or 802.11a/n standards to insure interoperability. It supports VOIP, VPN, multiple MAC addresses and DHCP.

With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface. There are no drivers or software that needs to be loaded to the computer.

The EZ-Go® comes complete with a powerful 14dBi 802.11g/n or 16dBi 802.11a/n MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting and Cat5e rated PoE (Power over Ethernet) power inserters with 24VDC auto-ranging power supplies. Customer needs to supply CAT5 cabling between the power inserter and the antenna and between the power inserter and his computer, router or switch.

With its advanced software, the EZ-Go® supports multiple operating modes, including; Access Point, Access Point (WDS), Client, Client (WDS), WAN Gateway, WLAN Gateway

Spec Sheet PDF

Data Rates

2.4Ghz 802.11n: up to 300Mbps

2.4 GHz 802.11g: up to 54Mbps

5GHz 802.11n: up to 300Mbps

5GHz 802.11a: up to 54Mbps

 

Standards

IEEE802.11g/n, 802.11a/n, 802.3, 802.3u

 

Power Requirements

Power Supply: 100-240VAC 50/60Hz

EZ-Bridge®: 12VDC to 24VDC Passive PoE

Average Power Consumption: 4W

 

Regulatory Certifications

FCC Part 15 / UL

 

RF Frequency Band

2400 ~ 2497 MHz

5100 ~ 5850 MHz

 

Modulation Technology

802.11n: TDMA

802.11g: OFDM

802.11a: OFDM

 

Receive Sensitivity (Typical)

802.11n: -90 dBm

802.11g: -75 dBm

802.11a: -75 dBm

 

Transmit Power

25dBm  316mW

 

DC Connector Power Out

Input Voltage @ Max 10W

Antenna

2.4GHz 14dBi MIMO Panel Antenna, 35deg Beamwidth, >20dB front to back

5GHz 16dBi MIMO Panel Antenna, 27deg Beamwidth, >22dB front to back

 

Operation Mode – Bridge or Router

Access Point, Access Point WDS, Client, Client WDS, WAN Gateway, WLAN Gateway

 

Interface

10/100Mbps RJ-45 LAN Port x 2

 

IP Configuration

Static or Auto configuration using DHCP Client

 

Security

MAC Address Filtering, WEP/WPA encryption, Hide SSID in beacons, Layer 2 isolation

 

Management Configuration

Web-based configuration (HTTP)

Console configuration (SSH)

SNMP Protocol

 

Firmware Upgrade

Upgrade firmware via web browser

 

Antenna Physical Dimensions (L x W x D)

314mm x 187mm x 65mm

12.4” x 7.3” x 2.5”

 

Complete System Weight

1.4 kg   (3 lbs )

 

Operating Temperature

-30°C to +70°C (-22°F to 158°F)

 

Warranty:

2 Year 

 

Product Application

We would LOVE to see how you are using our products.

Fill out our Product Application form, for a chance to win a "Thank You" gift.