Latest Firmware Downloads

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2+ (EZGO-0214+) . GEN 3      images.jpgThe LT2+ has 3 different versions. GEN 1 can be upgraded to GEN 2 by loading the latest GEN 2 firmware to the unit. GEN 2 and GEN 3 have slight hardware differences which require different firmware.  If you have GEN 2 you must only load GEN 2 firmware and if you have GEN 3 you must only load GEN 3 firmware. You can tell which GEN you have by looking at your firmware version in the discovery tool or the status page. 

Release Notes

 

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2+ (EZGO-0214+) . GEN 2      images.jpgThe LT2+ has 3 different versions. GEN 1 can be upgraded to GEN 2 by loading the latest GEN 2 firmware to the unit. GEN 2 and GEN 3 have slight hardware differences which require different firmware.  If you have GEN 2 you must only load GEN 2 firmware and if you have GEN 3 you must only load GEN 3 firmware. You can tell which GEN you have by looking at your firmware version in the discovery tool or the status page.

Release Notes

 

EZ-Bridge® LT2+ (EZBR-0214+) and EZGo2 (EZGO-0214+) . GEN 1    qmarktip1.jpgThis is the original LT2 model. It is no longer being produced, to get higher speeds out of your device you should upgrade to the LT2+

 

EZ-Bridge® LT2 (EZBR-0214) and EZGo2 (EZGO-0214).

Release Notes

 

EZBase-2 and EZ-Bridge® (EZBR-0315). 3Plus

Release Notes

 

EZ-Bridge® LT5+ (EZBR-0516+) and EZGo5+ (EZGO-0516+) . GEN 2      images.jpgThe LT5+ has been released as a GEN 2 board. Use this firmware for the latest LT5+ units.

Release Notes

 

EZ-Bridge® LT5 (EZBR-0519) and EZGo5 (EZGO-0519) and EZBase-5.    qmarktip1.jpgThis is the original LT5 model. It is no longer being produced, and will be replaced with the LT5+ which is capable of higher speeds.

Release Notes

 

Note: There are two versions of EZ-Bridge® Ultra. Each has a different firmware. The older version is V1 and the newer version is V2.



EZ-Bridge® Ultra V1
(Note: There is a different firmware for Side A and Side B)    qmarktip1.jpgEZ-Bridge_Ultra_V1_feeds.png
 V1 Feed Example


V5.5.8-2   Note: This update only for Ultra5

V5.5.8

V5.5.6

Ultra Release Notes

 



EZ-Bridge® Ultra V2
(Note: There is a different firmware for Side A and Side B)    qmarktip1.jpgEZ-Bridge_Ultra_V2_Feeds.png

V5.5.10  

Ultra Release Notes

 

 

Download the Discovery Tool    qmarktip1.jpgThe Discovery Tool will help find your EZ-Bridge® on the network. It will Discover across different subnets. Some software like Antivirus or Firewall may prevent discovery.

Note: If you have version 1.34 don't use it. It has a reset to defaults error.

 

EZ2+ and EZ5+ SNMP MIB File qmarktip1.jpgThe MIB file gives a definition of SNMP commands that are available in the EZ2+ and EZ5+ wireless antennas

SNMP MIB File Aug 30 2015

 

EZ OS Programming Instructions    qmarktip1.jpgThese are the generic instructions for general information. See product User Guides for specific instructions OR visit our Knowledgebase