$249.95
326 in stock
- Ships in 1-2 days
- No Risk Guarantee
- 2-3 Year Warranty
Features
• MPPT Temperature Compensated Charging
• Fully Automatic Operation
• LCD Displays: Battery Volts, Battery Temp, Battery Level, Load Current and Solar Current
• Autoranging 12V or 24V Battery Arrays
• Multimode Load Operation – 5 selectable modes
• Automatic 30day Battery Equalization
• Conformal Coated Electronics for Environmental Protection
• TVS lightning protection, Industrial Temperature Range
• Low self consumption <1W
Applications
• Remote Power Systems
• Solar Lighting
• Solar Power Applications
Description
The Tycon Solar™ TP-SC24-40N-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load Current and Solar Current.
There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this configuration and the available Android or iOS mobile app, the solar controller can be monitored and controlled from a distance.
Technical Information
| Ship Weight | 5.16 lbs |
|---|---|
| Ship Dimensions | 12 × 9 × 6 in |
Technical Links
FAQs
Frequently Asked Questions
LIT is a battery settings mode. When switching to LIT, the S parameters should be the same as the previous default settings.
When battery voltage falls below 10V the battery BMS disconnects the battery discharge. As soon as there is PV voltage the battery BMS connects the charge and discharge. We recommend the customer set the LOAD Output turnoff at 11V so tha load disconnects before the battery BMS disconnects the discharge.
We recommend that you just leave the parameters set to AGM Lead Acid. This is how the Lithium battery BMS is designed. The AGM Lead Acid settings in the charge controller are compatible with the battery BMS.
You won’t see voltage spikes when connected to the battery (BMS), even if the battery BMS disconnects the discharge. No firmware updates are available or needed to switch from AGM lead acid to lithium.
Having physical access to the TPDIN-WEB3 Monitor and log into it.
Select the MPPT tab
What you need to do now is to make sure the enable Load Toggle is selected
At this point you will toggle the load to off then back to On then uncheck the Enable Toggle Load box.
This makes changes to the firmware in the charge controller so now power down your controller – disconnect solar charging then disconnect the batteries by removing the fuse
Wait 1 minute then reconnect the batteries and verify everything comes back on including your load. If everything is back on then reconnect your solar.
The ground between the V- load output on the MPPT solar controller and the TPDIN-Monitor-WEB3 V- needs to be isolated for the MPPT controller to sense the currents properly.
A TP-DCDC-1224 DCDC converter can be used to isolate the power and solve this issue.
The MPPT charge controllers by default are set for 12V/24V auto detect. Using the keys on the front of the unit go into the settings and set for 24V battery instead of 12/24 auto detect. Save the setting. Power down the unit by disconnecting the solar and then battery. Power up the unit. It should power up in 24V battery mode. Re-connect the solar input.
You must be logged in to post a review.
Related products
12V 85W Solar Panel w/ 25 Yr Output Warranty, 35" Cable w/ MC-4 Conn. *Pole and Mounting Hardware are not included*
RS232 TPDIN to MPPT Interface Cable, 48" (1.2m). For TP-SC24-20N-MPPT, TP-SC24-40N-MPPT, TP-SC48-60-MPPT
24V 360W Solar Panel w/ 25 Yr Out warranty, 41" cable w/ MC-4 conn *Pole and Mounting Hardware are not included*
Teltonika RUT241 Bundle for remote cellular access. Includes: 150GB of RMS data , 1 yr RMS Remote Access, DIN Rail Mount, AC/DC power supply, DC Power Cable and External Weatherproof MIMO mobile antenna.
Tycon Systems Remote Management System (RMS) Single Credit. Enables remote connection to RMS for 1 device for 1 month
Tycon Systems Remote Management System (RMS) Access Credit 12 Month Pack. Enables remote connection to RMS for 1 device for 12 months or 12 devices for 1 month.
RMS Data Pack with 150GB of data which should last 5-10 years with normal use.
You may also like…
12/24V Auto 60A MPPT Solar Charge Controller w/ Status Display and Load Control, DIN Rail/Wall Mt, Wet, AGM, Gel, Lithium, Custom Battery Charging
48V 20A MPPT Solar Controller w/ 7 Port GigE Passive PoE Switch/Remote Monitor, 24V/48V PoE, 35W/port, 2.25A Aux Port, Manageable, Industrial Strength
Reviews
There are no reviews yet