PoE 8 Port Switch (TP-SW8 Series)


The TP-SW8-D Power over Ethernet 802.3af/at (PoE) 10/100Mb switch offered by Tycon Power® is a fully automatic high speed 8 port Ethernet switch.

The -NC version is a passive PoE model for devices which are not 802.3af/at compliant.

On the -NC version the PoE output voltage = the input voltage so it is universal in its application. The DC input power range can be from 12V to 57V. The units can be powered via 2 or 4 pair PoE to port 8 (2A max). TP-SW8- D has a 2 channel 802.3at input for 70W max PoE input. Both models supply power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

18V, 24V and 48V 60W, 120W and 180W power supplies are available. There are 2 power inputs for attachment of primary and backup power sources.



  • High Power 10/100Mb 8 Port PoE Switch
  • Remotely Power Equipment thru CAT5 Cable up to 100m
  • Extend Ethernet and PoE up to 200m
  • Up to 2A per Port
  • Built-In Surge Protection
  • Automatic MDI/MDI-X Crossover
  • High Temperature Operation
  • CE and FCC Certification


  • Wireless Access Points and Client Devices
  • IP Phone and Security Camera Systems
  • Power multiple devices from 1 data cable


Spec Sheet PDF

TP-SW8 - 8 Port 802.3af/at 10/100Mb PoE Switch with 120W Power Supply

TP-SW8-D - 8 Port 10/100Mb 802.3af/at PoE Switch

TP-SW8-NC - 8 Port 10/100Mb Passive PoE Switch

Ethernet Standard

IEEE802.3/IEEE802.3u (10 base-T/100base-T)

POE Standard (Port 1-8)

TP-SW8 IEEE802.3af/at

TP-SW8-D  IEEE802.3af/at

TP-SW8-NC  Passive POE 12-57VDC


One data/PoE input and seven data/PoE outputs

automatic crossover and polarity

Transmission Speed

100 Mbps(100base-T),10 Mbps(10base-T)


Switch Technology

Store and Forward



Flow Control

IEEE802.3x(full-duplex), Back Pressure(half-duplex)

Data Transmission Rate

148800pps for 100base-T, 14880pps for 10base-T

Address Table

2K MAC, self-learning


Shielded RJ45

POE Port

Port 1-7, auto power management

Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)

Maximum POE Power

Port 1-8, 2A Per Port – NC Version

Port 1-7(35W), 8 (70W) – 802.3af/at Version

Wire Terminal or DIN Connector Input Max 10A

POE Protection

Over Temperature, Over Current, Over/Under Voltage

Data Surge Protection

IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC61000-4-4 (EFT) 40A (5/50ns)

IEC61000-4-5 (Lightning) 20A (8/20μs)


Link  (Green On, Yellow On)

Activity  (Green Blinking, Yellow Blinking )

PoE Input Detect-4 pair (Yellow On)

PoE Input Detect-2 pair (Yellow Blinking)

Power On  (Green On)

Power On Alarm  (Red On)

DC Power Input

46V to 57V,    12V to 57V(-NC Version)

Dual DC Inputs, Reverse Polarity Protected.

Self Consumption

<1.5 Watts

Operating Temperature

-40 to +85°C  (-40 to 185°F)

Operating Humidity (RH)

5% - 90% (non condensing)

MTBF (Mean Time Between Failure)

70,281 Hours

Storage Temperature

-55 to +105°C  (-67 to +221°F)

Dimensions (LxWxH)

159 x 116 x 40mm  (6.3 x 4.6 x 1.6”)


0.45kg (1lb)


3 Years

Product Application

We would LOVE to see how you are using our products.

Fill out our Product Application form, for a chance to win a "Thank You" gift.