Managed Industrial 10 Port PoE+ Switch (TP-SW8G-2SFP)

Description

Item #TP-SW8G-2SFP

The TP-SW8G-2SFP Power over Ethernet (PoE) 10 port Gigabit switch offered by Tycon® is a fully automatic high speed Layer 2+ Ethernet manageable switches. The 10 port model has 8 PoE + 2 SFP ports. The PoE ports are Mode A (pins 1,2,3,6) type and are manageable via the user interface. They can be set to PoE, PoE+ or OFF. Default is PoE+.

The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.

With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE+ management are just some of the features available with this Industrial PoE Switch.

Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.

The switches are compliant with 802.3az Energy Efficient Ethernet task force specs. The switch automatically powers down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.

This switch can be powered by 12VDC to 36VDC if no PoE output is required or powered from 48VDC to 57VDC if PoE is required.

The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 20km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.

Features

Features

  • Industrial Strength (-40C to +80C Operating Temperature)
  • 8 PoE+ and 2 fiber (SFP) Ports
  • 10/100/1000 Gigabit Compatible
  • Manageable via Console Port or IP
  • Surge Protected Voltage and Ethernet Inputs
  • Integrated DIN Rail Mount

Applications

  • Outdoor Network Installations
  • Cameras and Wireless Radios
  • Factory networks

Specs

Spec Sheet PDF

Ports

8 Ports 802.3af/at, PoE+ (30W) Mode A
2 SFP/LC Fiber Ports
1 Console Port

Transmission Speed

1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation

Connections

Shielded RJ45, Shielded SFP/LC, Grounded to Case

Power Input

Vin 48VDC to 57VDC on Wire Terminal (Max wire size 12AWG)

Note: The switch will run on 12V to 36V if no PoE function is needed. For PoE function, the input voltage needs to be at least 48VDC.

Self Consumption

< 5 watts typical

LED’s

System Power: Blue;  Ethernet Link: Amber;  PoE: Green;  Fiber: Green

PoE Protections

Over Voltage, Over Current, Short Circuit

Surge Protection

2kv on Ethernet Ports, 4kv on Power Input

Management Methods

WEB, CLI, TELNET, SSH, SNMP

Management Functions

VLAN based on port, VLAN based on 802.1Q, Mirroring, Port Isolation, IGMP

Snooping, DHCP Snooping, LLDP, POE+ Management, IP

Protection, ARP Inspection and Access Control List, NTP, etc

Network Protocols and Standards

IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET

802.3x Flow Control

802.3ab Gigabit Media Independent Interface (GMII)

802.1q VLANs

802.1p (QOS)

802.3ad Link Aggregation Control Protocol (LACP)

802.3af /at (PoE)

802.3az Energy-Saving

IEEE G.8032 Ethernet ring protection (<50ms)

(STP) 802.1d,  (RSTP) 802.1w

VLANS

Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN

IGMP v1/v2 snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports1024 multicast groups (source-specific multicasting is not supported)

Network Protections

Port Aggregation, Port Rate Limitation, Broadcast Storm Restraint

Jumbo Frame Support

9.6K

Bandwidth

192Gbps (non-blocking)

Switching Capacity

14.88 mpps @ 64 byte packets

Packet Forwarding Rate

14.88 mpps @ 64byte packets

Forwarding Mode

Save and forwarding, link-speed forwarding ( Frame Size Range:64~1536)

Address Table

8K MAC, self-learning

Operating Temp

-40 to +80°C   (-40 to 176°F)

Operating Humidity (RH)

5% - 95% (non condensing)

Storage Temperature

-40 to +85°C  (-40 to +185°F)

MTBF

539,608 hours

Certifications

CE, CE/LVD, FCC, RoHS

Dimensions (LxWxH)

165*148*54(mm) (6.5 x 5.8 x 2.1”)

Weight

0.9kg (2lb)

Warranty

5 Years

Product Application

We would LOVE to see how you are using our products.

Fill out our Product Application form, for a chance to win a "Thank You" gift.