Automatic Power Vent for Steel Enclosure (RPST-POWERVENT-24)



The RPST-PowerVent is a field upgradeable power ventilation system for Tycon® ENC-ST enclosures which are used in RPST Remote Power and UPS-ST Outdoor Backup Power systems. The RPST-PowerVent unit replaces the existing access plate located in the bottom of the enclosure. The RPST-PowerVent has a built in thermostat that turns it on when the temperature reaches 50 degrees centigrade (122F) and turns it off when the temperature falls below 50C. The thermostat control saves battery life in battery systems by turning on the fan only when needed to cool the interior of the enclosure. It typically takes less than 5 minutes to cool the interior of the enclosure to ambient temperature. The system has stainless steel mesh filters which can be removed for cleaning. The unit works on 12V or 24V battery systems. It comes with a 1m long 2 wire cable to connect to a voltage source.



  • 12/24V Power Ventilation Adapter for Tycon ST Enclosures
  • Field Upgradeable
  • Thermostatically Controlled
  • Only 1W Power Draw at 12VDC


Spec Sheet PDF

Voltage Requirements

12VDC to 24VDC

Power Requirements

1W @ 12VDC – when temperature over 50C (122F)

Power Connection

1 meter 22AWG 2 Conductor red/black wire

Fan Air Volume

14 CFM min

Filter Mesh x 2

Stainless Mesh - 0.050” Openings

Cable Ports

20mm holes x 4 for Cable Gland


8 Existing Screws in Enclosure Bottom Plate

Operating Temperature

-30C to +65C (-22F to 149F)

Humidity (RH)

5% - 95% (non-condensing)

Dimensions (LxWxH)

330 x 91.4 x 38mm (13” x 3.6” x 1.5”)


430g (15 oz)

Product Application

We would LOVE to see how you are using our products.

Fill out our Product Application form, for a chance to win a "Thank You" gift.