TP-SC48-60P-MPPT
12/24/36/48V Auto 60A MPPT Solar Charge Controller w/ Status Disp/LVD Load Cpntrol, DIN Rail/Wall Mt, Wet, AGM, Gel, Lithium, Custom Battery Charging
User Guide
Key Features:
• 150V Solar Input, 60A Battery Charging
• 30A Soft Start Load Control
• Embedded Bluetooth
• Positive Ground for -48V Battery Systems
$349.95
In Stock Soon
- Ships in 1-2 days
- No Risk Guarantee
- 2-3 Year Warranty
Features
• MPPT Temp Compensated Charging (99.5% Efficient)
• Embedded Bluetooth Interface
• Color LCD Displays: Battery/Load/Solar Volts/Amps/Watts, Battery Temp, and Battery Level
• Fully Automatic Operation
• Auto-ranging 12V/24V/36V/48V Battery Arrays
• Multimode Load Operation – 4 selectable modes
• Soft Start 30A Load Output to Power High Capacitive Loads
• TVS lightning protection, Industrial Temperature Range
• Low self-consumption <1W
Applications
•Remote Power Systems
• Solar Lighting
• Solar Power Applications
The Tycon Solar™ TP-SC48-60P-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V,24V,36V and 48V battery systems. They are designed to charge Sealed (AGM), GEL, Flooded, and Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral color TFT LCD display that shows Battery Volts/Amps/Watts, Battery Level, Battery Temperature, Load Volts/Amps/Watts and Solar Volts/Amps/Watts. The display also shows the current time and charge mode (CC-Constant Current, CV-Constant Voltage and CF-Float Charge) or Standby (Running from battery). The display turns off automatically to save power. Tap the screen to turn on.
They have multiple load operating modes which can be set through the Mobile or PC app. On/Off Manual Mode, PV Voltage Control Mode, Dual-Time Control Mode, PV & Time Control Mode. Load modes are not settable from the front panel. Default is ON/Off Manual Mode.
The 30A load output has a soft start feature so it can smoothly and reliably power up high capacitance loads. The load can be turned on/off from the front panel or via the PC or Mobile Apps. They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, over-discharge and over-temperature. The built-in overdischarge protection and low self-consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery.
The units are protected against lightning strikes with TVS diode protection. They operate over a wide industrial temperature range.
Connections are via 6 screw terminals for wire size up to 4AWG. The controllers are internally fused for protection, but we recommend always using an external fuse between the controller and the battery. There are four 3mm threaded holes for mounting permanently to a flat plate. There is also a bracket included for mounting to a wall or DIN rail using the Tycon #DIN-CLIPKIT-UNI DIN rail adapter bracket kit.
The MPPT controllers can be connected via the RS485 interface for parallel operations, feeding multiple solar arrays into a single battery bank.
Embedded Bluetooth Interface for monitor and control using mobile app
Also available are a RS485 interface to connect to a PC using the Tycon #TP-SC-USB-RS485 and the MyGreen PC Software.
Tycon’s #TPDIN-Monitor-WEB3 V2 interfaces to the MPPT controllers via a #TPDIN-CABLE-RS485 and provides remote datalogging and load control via Ethernet and SNMP in addition to other features available in the TPDIN-Monitor-WEB3
Technical Information
| Ship Weight | 6.14 lbs |
|---|---|
| Ship Dimensions | 16 × 11 × 6 in |
FAQs
Frequently Asked Questions
LIT is a battery settings mode. When switching to LIT, the S parameters should be the same as the previous default settings.
When battery voltage falls below 10V the battery BMS disconnects the battery discharge. As soon as there is PV voltage the battery BMS connects the charge and discharge. We recommend the customer set the LOAD Output turnoff at 11V so tha load disconnects before the battery BMS disconnects the discharge.
We recommend that you just leave the parameters set to AGM Lead Acid. This is how the Lithium battery BMS is designed. The AGM Lead Acid settings in the charge controller are compatible with the battery BMS.
You won’t see voltage spikes when connected to the battery (BMS), even if the battery BMS disconnects the discharge. No firmware updates are available or needed to switch from AGM lead acid to lithium.
Having physical access to the TPDIN-WEB3 Monitor and log into it.
Select the MPPT tab
What you need to do now is to make sure the enable Load Toggle is selected
At this point you will toggle the load to off then back to On then uncheck the Enable Toggle Load box.
This makes changes to the firmware in the charge controller so now power down your controller – disconnect solar charging then disconnect the batteries by removing the fuse
Wait 1 minute then reconnect the batteries and verify everything comes back on including your load. If everything is back on then reconnect your solar.
The ground between the V- load output on the MPPT solar controller and the TPDIN-Monitor-WEB3 V- needs to be isolated for the MPPT controller to sense the currents properly.
A TP-DCDC-1224 DCDC converter can be used to isolate the power and solve this issue.
The MPPT charge controllers by default are set for 12V/24V auto detect. Using the keys on the front of the unit go into the settings and set for 24V battery instead of 12/24 auto detect. Save the setting. Power down the unit by disconnecting the solar and then battery. Power up the unit. It should power up in 24V battery mode. Re-connect the solar input.
You must be logged in to post a review.
Related products
12V 85W Solar Panel w/ 25 Yr Output Warranty, 35" Cable w/ MC-4 Conn. *Pole and Mounting Hardware are not included*
USB to RS485 PC MyGreen interface for TP-SC24-30N/60N and TP-SC48-60P MPPT Solar Controllers
Teltonika RUT241 Bundle for remote cellular access. Includes: 150GB of RMS data , 1 yr RMS Remote Access, DIN Rail Mount, AC/DC power supply, DC Power Cable and External Weatherproof MIMO mobile antenna.
Tycon Systems Remote Management System (RMS) Single Credit. Enables remote connection to RMS for 1 device for 1 month
Tycon Systems Remote Management System (RMS) Access Credit 12 Month Pack. Enables remote connection to RMS for 1 device for 12 months or 12 devices for 1 month.
RMS Data Pack with 150GB of data which should last 5-10 years with normal use.
You may also like…
48V 20A MPPT Solar Controller w/ 7 Port GigE Passive PoE Switch/Remote Monitor, 24V/48V PoE, 35W/port, 2.25A Aux Port, Manageable, Industrial Strength
Reviews
There are no reviews yet