How do I reset the EZ-Bridge® to factory defaults if I can’t open the unit’s web page?

EZ-Bridge® Viewed: 166
0 1
  • Power up the EZ-Bridge® unit. Wait at least 2 minutes for the unit to boot,
  • Press and hold the black reset button (visible inside the bottom of the unit) for 15-20 seconds.

WARNING!

  • Don’t exceed 25 seconds or the firmware will be replaced with root firmware and will need all the settings to be reprogrammed.
  • Wait at least 2 minutes for reboot.

The unit will give two beeps when ready.

  • Then power cycle the antennas and wait an additional 2 minutes.

The unit will give two beeps when ready.

Unit will now be reset to factory defaults.