TP-DC-2448GDX2-HP

18-36VDC Input, Dual 56V 802.3at Gigabit PoE Output, 70W

Spec Sheet
User Guide





$145.95

61 in stock

  • Ships in 1-2 days
  • No Risk Guarantee
  • 2-3 Year Warranty

Features
• Input Voltage 24VDC
• Dual 802.3af/at outputs
• High Power Output to 70W
• Surge Protected to 15kV
• Dual DC Inputs for Connecting 2 Power Sources
• 10/100/1000 Data Compatibility, Shielded Connectors
• Short Circuit, Over Current and Reverse/Over Voltage Protection
• Industrial Temperature Range, DIN Rail Mountable

Applications
• 24VDC Remote Power Systems running on batteries
• Power a Camera and Wireless using a single PoE Injector
• Power a Wireless AP and Backhaul using a single PoE injector

• PoE Lighting Applications

The TP-DC-2448GDX2-HP is a unique high power PoE injector with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path between the devices is handled by the injector so no PoE switch is required.

This model runs on 24VDC as well as 110/220VAC grid power. The total combined output is up to 70W.

They have two DC inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for short circuit, overload and surges caused by ESD or lightning. The built-in surge protection protects sensitive connected devices from damage due to surges on data and PoE lines. All 8 wires are protected.

The input voltage and output voltage are isolated to avoid any grounding or negative voltage issues.

Technical Information

Ship Weight 0.65 lbs
Ship Dimensions 7 × 4 × 2 in
Input Voltage

Output Voltage/Type

Output Power

Network Speed

Temperature Range

Reviews

There are no reviews yet

Be the first to review “TP-DC-2448GDX2-HP”

Frequently Asked Questions

MS3xx and MS6xx reset password to factory default

Please follow the instruction as below and reset the password to default.   Turn off the unit, disconnect any Ethernet cables attached to the module. Press and hold S1 switch (on the left of the RJ45) and turn on the unit After 6 seconds,...

Read More

What do the LEDs on the TP-DCDC-1256GD-VHP indicate?

The TP-DCDC-1256GD-VHP has two separate 802.3at detects the output. One on pins 1,2,3,6 and the other on pins 4,5,7,8. Each detector has an LED associated with it. If the LED is green, it means that the unit had a successful 802.3at detect on the...

Read More

What does the VIN1+, VIN2+, VIN-, and FG mean on my DC to DC converter?

VIN1+ and VIN2+ are used to power the device using 2 different sources. VIN- is there the negative wire connects to. FG is your chassis ground.

Read More

DC to DC Converter - Where does the FG wire connect and where does VIN- wire connect, shouldn't they be wired together?

FG is frame ground or chassis ground or earth ground. VIN- is connected to V- in your system. In some systems, V- is connected to chassis ground or earth ground. In this case, FG should also be connected directly to chassis ground. It will be...

Read More

Where can I get those green wire terminal connectors?

You can buy replacement connectors at Digikey.com Specific links are below: 4 PIN Connector"https://www.digikey.com/product-detail/en/on-shore-technology-inc/EDZ950-4/ED1719-ND/123871" 5 PIN Connector...

Read More

Join Our Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.