I can’t open the EZ-Bridge® unit’s web page with my browser

EZ-Bridge® Viewed: 84

To open the EZ-Bridge® web page with your browser you need to type in the IP address of the EZ-Bridge® into the address bar of a web browser (like Firefox, Chrome, etc.). Your computer must be on the same subnet as the EZ-Bridge®. If the EZ-Bridge® IP address is, your computers IP address must be on the same 192.168.1.xxx subnet.   You can reset your computer’s IP address through your windows network control panel. After you access the EZ-Bridge® web control panel you can set the EZ-Bridge® to a fixed IP address so you always know where it is located on your network

Note: No duplicate IP addresses can exist on a network. Tycon has developed a discovery tool to help you find the IP address of the EZ-Bridge® on your network.  You can find the Discovery tool for your model on the TyconSystems.com support here: