Mast, Pneumatic, Locking, 4.2m, Qty 3 pair AWG 16 + Qty 2 CAT5 cables in center of mast, 50kg weight capacity. With 5700078 36″ extension mast w 149mm plate to match mast top plate and 5700061 air regulator. Wiring through mast with 2′ pig tail at the top and 15′ pigtail at bottom. 15′ air tubing, incl bolts to tie mast ext to mast.
$2,499.95
- Ships in 1-2 days
- No Risk Guarantee
- 2-3 Year Warranty
You must be logged in to post a review.
Frequently Asked Questions
How do you calculate Autonomy of a battery backup system?
These are the autonomy calculations
Autonomy = Battery Ah x Battery Volts = Battery Watt Hrs * 50% battery discharge max = Battery Watt Hr Capacity / Ave Load in Watts = Autonomy Hrs
Ex:
Battery Ah = 180Ah
Battery Volts = 12V
Ave Load -...
Read More
Read More
I added a camera to my trailer, what can I do to cover the extra power draw?
Our MobileSolarPro trailers are designed to be modular, they can grow with your needs. You can add solar panels up to a total of 4 panels, you can add a second battery bank up to a total of 8x 12v 180ah batteries, and you have the option of...
Read More
Read More
Can I run my own wires through the mast.
Unfortunately the Harness that runs through the mast is maxed out and cannot be added to. You can do almost anything you need to with the 2x Cat5 cables and 6x primary wires that are custom manufactured into the harness.
Read More
Read More
What wires run through the mast?
A The mast is custom made with 2x Cat5 cables and 6x 14awg wires running through the harness which provides a data path from the top of the mast to your deck enclosure and also sends 12v 24v and 56v to the top of the mast for your convenience...
Read More
Read More
Do you provide connectivity?
Tycon does not currently carry a cellular router/modem. Most customers have a preferred device that they can use on our trailers, we provide the power to operate your device.
Read More
Read More
Do cameras come with the trailer?
Tycon does not sell Cameras. We are a power company and provide a mobile power solution for you to power your preferred camera and security systems.
Read More
Read More
How can I add a grid or generator powered battery charger to my RemotePro system with MPPT solar controller?
The following wiring diagram shows how to add an AC powered battery charger to the RemotePro system to provide supplemental charging of the batteries.
Read More
Read More
What information do you need to help me size a system?
We need to know the load in watts for each piece of equipment you plan to use. We also need to know the operational voltage for each piece of equipment and if it is powered through wires or PoE. A good way is to send us a spec sheet for the...
Read More
Read More
How much sun does my RemotePro® need?
1 Peak Sun-hour = 1000 Wh/m or 1kWh/m.
The Sun provides approximately 1000 Watts of power per square meter of area at Earth’s radial distance from the Sun. For every 1 hour the Sun provides that power, the Energy applied to that square meter...
Read More
Read More
Where can I find my Peak Sun Hours?
https://tsi.tyconsystems.com/html/nrel_lookup.htm
Follow the link next to “Average Hours of Peak Sunlight per Day” field. Enter your zip code or city state to look up average peak sun hours each month. Alternatively, NREL (National Renewable...
Read More
Read More
I have my system hooked up but I’m not getting the correct voltage out of the controller, what’s wrong with it?
Most often this might be caused by loose or incorrect connections, or the product is designed for a different application. First check the installation manual to be sure all connections are correct, and that the device is designed to supply the...
Read More
Read More
How to calculate how much solar panels I need to support my equipment?
We have a free system requirements calculator located at: https://tyconsystems.com/tycon-support/tycon-calculators/
You can use the online calculator or follow the guide below to determine solar requirements.
First calculate the total watts...
Read More
Read More
Reviews
There are no reviews yet