RPMS-LockKit

The mast is custom made with 2x Cat5 cables and 6x 14awg wires running through the harness which provides a data path from the top of the mast to your deck enclosure and also sends 12v 24v and 56v to the top of the mast for your convenience when powering your equipment.  The switch at the top of the mast will have  5-ports capable of supporting different voltage requirements.

Our MobileSolarPro trailers are designed to be modular, they can grow with your needs. You can add solar panels up to a total of 4 panels, you can add a second battery bank up to a total of 8x 12v 180ah batteries, and you have the option of adding a wind turbine kit(RP-WTKit-2) to the trailer as a supplemental power source.

The Mast is 18’ off the ground to the top of the mast top extension.

These are the autonomy calculations

Autonomy = Battery Ah x Battery Volts = Battery Watt Hrs  * 50% battery discharge max = Battery Watt Hr Capacity / Ave Load in Watts = Autonomy Hrs

Ex:

Battery Ah = 180Ah

Battery Volts = 12V

Ave Load – 50W

180AH x 12V = 2160WHrs * 0.5 = 1080WHrs / 50W = 21.6hrs Autonomy

Tycon does not currently carry a cellular router/modem. Most customers have a preferred device that they can use on our trailers, we provide the power to operate your device.

Tycon does not sell Cameras. We are a power company and provide a mobile power solution for you to power your preferred camera and security systems.

Unfortunately the Harness that runs through the mast is maxed out and cannot be added to. You can do almost anything you need to with the 2x Cat5 cables and 6x primary wires that are custom manufactured into the harness.