 | Thank you for Signing Up |
Tycon Systems - Newsletter
Free Bluetooth
TP-SC24-30N-MPPT
12/24V Auto 30A MPPT Solar Controller w/ Status Display and 20A Load Control, DIN Rail/Wall Mt, Wet, AGM, Gel, Lithium, Custom Battery Charging
User Guide
Key Features:
• Embedded Bluetooth Interface and Mobile App
• Soft Start Load Control
• Fully Automatic Operation
• 30A Battery Charge, 20A Load Control
$199.95
145 in stock
- Ships in 1-2 days
- No Risk Guarantee
- 2-3 Year Warranty
Features
- TP-SC24-30N-MPPT
- MPPT Temp Compensated Charging (99.5% Efficient)
- Embedded Bluetooth Interface
- Color LCD Displays: Battery/Load/Solar Volts/Amps/Watts, Battery Temp, and Battery Level
- Fully Automatic Operation
- Auto-ranging 12V or 24V Battery Arrays
- Multimode Load Operation – 4 selectable modes
- Soft Start 20A Load Output to Power High Capacitive Loads
- TVS lightning protection, Industrial Temperature Range
- Low self-consumption <1W
Applications
- Remote Power Systems
- Solar Lighting
- Solar Power Applications
Description
Technical Information
| Ship Weight | 4.43 lbs |
|---|---|
| Ship Dimensions | 12 × 9 × 6 in |
FAQs
Frequently Asked Questions
What differences can I expect when switching my batteries to LiFePO4?
LIT is a battery settings mode. When switching to LIT, the S parameters should be the same as the previous default settings.
When battery voltage falls below 10V the battery BMS disconnects the battery discharge. As soon as there is PV voltage the battery BMS connects the charge and discharge. We recommend the customer set the LOAD Output turnoff at 11V so tha load disconnects before the battery BMS disconnects the discharge.
We recommend that you just leave the parameters set to AGM Lead Acid. This is how the Lithium battery BMS is designed. The AGM Lead Acid settings in the charge controller are compatible with the battery BMS.
You won’t see voltage spikes when connected to the battery (BMS), even if the battery BMS disconnects the discharge. No firmware updates are available or needed to switch from AGM lead acid to lithium.
Procedure for toggling the LOAD in the Firmware?
Having physical access to the TPDIN-WEB3 Monitor and log into it.
Select the MPPT tab
What you need to do now is to make sure the enable Load Toggle is selected
At this point you will toggle the load to off then back to On then uncheck the Enable Toggle Load box.
This makes changes to the firmware in the charge controller so now power down your controller – disconnect solar charging then disconnect the batteries by removing the fuse
Wait 1 minute then reconnect the batteries and verify everything comes back on including your load. If everything is back on then reconnect your solar.
My WEB3 is connected to the MPPT solar controller with an RS485 serial cable but the current readings are all zero on the MPPT display and in the WEB3 MPPT page
The ground between the V- load output on the MPPT solar controller and the TPDIN-Monitor-WEB3 V- needs to be isolated for the MPPT controller to sense the currents properly.
A TP-DCDC-1224 DCDC converter can be used to isolate the power and solve this issue.
I have a Tycon MPPT solar charge controller. My batteries are wired for 24V, but they are so low the controller thinks they are 12V batteries and won’t charge them
The MPPT charge controllers by default are set for 12V/24V auto detect. Using the keys on the front of the unit go into the settings and set for 24V battery instead of 12/24 auto detect. Save the setting. Power down the unit by disconnecting the solar and then battery. Power up the unit. It should power up in 24V battery mode. Re-connect the solar input.
1 review for TP-SC24-30N-MPPT
You must be logged in to post a review.
You may also like…
Free Bluetooth
Out of stock
$249.95
12/24V Auto 60A MPPT Solar Charge Controller w/ Status Display and Load Control, DIN Rail/Wall Mt, Wet, AGM, Gel, Lithium, Custom Battery Charging
Tyler Hogan –
Thank you for the great customer service! I’ve been buying Tycon equipment for going on 15 years now. In the early days the equipment was great, but Tycon was slow on customer service. Happy to say the customer service is now on par with the equipment!